I have been on a tear on making cotton dish cloths.
Tunisian Crochet with two bands of a second yarn, the remains of both yarns made up the edging and the loop with no yarn to spare.
I combined Tunisian crochet with single crochet, causing strips of Tunisian crochet to face the opposite sides. The edging is stepped length stitch, half, single, half double, double, half triple and triple, and back down again.
Using single crochet, I fed in a second yarn in strips
Since I had more of the yarn left, I made a second mate to the first.
Another view of an earlier wash cloth where I created the wave stitch by using half single, single, half double, double, half triple, triple and back down stitches, then reversing it on the next pass.
Tunisian crochet with a larger hook. Note I used the leftover yarn to make the bands in the cloth on the right.
Sunday, August 26, 2012
Week 632 Wood Working
Year 12, Week 6, Day One (week 632)
(January 17, 2000 was my first carving day.)
08-26-12 Sunday
windy, wet with squall lines passing through, all to the thanks of Tropical Storm Isaac. The ground in the area I work is wet, and spray is pushed quite high. Not weather for working outside. This weather report is brought to you by the City Of Pompano Beach Department of Tourism and the National Hurricane council.
The past two weeks, I made a pair of drum sticks for a drummer who gave me some wood. I gave him the sticks last night. He said they were a bit thicker than normal, and they could have been longer. Otherwise he liked them. I checked them after he was done with the session and there were dents in the wood but no chips like the ones left by the Sunday service drummer who hits harder. I kept one broken drum stick to use as a guide for when I make more.
Today, I could have sat out under the awning and carved, but the strong winds and heavy rains would have made it a little miserable. In the heavy downpours, water backs up beneath the awning for a while before it drains off.
The crosses I made a few weeks ago, are now up on the walls of the church. From the normal viewing distance, they look commercial. Only when you get up close that you see the flaws in them.
I had picked up some cotton last weekend and I've made two Dish cloths. One I made yesterday start to finish. They look good. I had fabric left over from a third dishcloth I made so I fed that into the pair as stripes. It came out pretty good. I wanted to do that with a fourth one but the yarn I am working with is too close in color for the effect I am after.
I took a load of stuff home this week in preparation to moving back into my own place. I have several more loads to do before I am ready. There are things I need at home when I go there, and things I can move out now, so that is the process. I am also sorting my piles of stuff between WOODWORKING, HOME, and stay in the TRUCK stuff.
Next weekend should be a whole lot better weather. I hope to get some work done.
finished drum sticks
cross on the front of the church
cross on the side wall of the church
08-26-12 Sunday
windy, wet with squall lines passing through, all to the thanks of Tropical Storm Isaac. The ground in the area I work is wet, and spray is pushed quite high. Not weather for working outside. This weather report is brought to you by the City Of Pompano Beach Department of Tourism and the National Hurricane council.
The past two weeks, I made a pair of drum sticks for a drummer who gave me some wood. I gave him the sticks last night. He said they were a bit thicker than normal, and they could have been longer. Otherwise he liked them. I checked them after he was done with the session and there were dents in the wood but no chips like the ones left by the Sunday service drummer who hits harder. I kept one broken drum stick to use as a guide for when I make more.
Today, I could have sat out under the awning and carved, but the strong winds and heavy rains would have made it a little miserable. In the heavy downpours, water backs up beneath the awning for a while before it drains off.
The crosses I made a few weeks ago, are now up on the walls of the church. From the normal viewing distance, they look commercial. Only when you get up close that you see the flaws in them.
I had picked up some cotton last weekend and I've made two Dish cloths. One I made yesterday start to finish. They look good. I had fabric left over from a third dishcloth I made so I fed that into the pair as stripes. It came out pretty good. I wanted to do that with a fourth one but the yarn I am working with is too close in color for the effect I am after.
I took a load of stuff home this week in preparation to moving back into my own place. I have several more loads to do before I am ready. There are things I need at home when I go there, and things I can move out now, so that is the process. I am also sorting my piles of stuff between WOODWORKING, HOME, and stay in the TRUCK stuff.
Next weekend should be a whole lot better weather. I hope to get some work done.
finished drum sticks
cross on the front of the church
cross on the side wall of the church
Week 630 Woodworking
Year 12, Week 4, Day One (week 630)
(January 17, 2000 was my first carving day.)
08-12-12 Sunday
(January 17, 2000 was my first carving day.)
08-12-12 Sunday
DURING THE WEEK
For the past several weeks, my company was bringing me back and forth to work. Thursday afternoon, I got word that they were having problems and would not be able to get me to work on Friday. Once I got home, Mom and I went to check on a truck I looked at previously. We ended up getting it.
The truck is a black Ford Ranger with a six cylinder engine, overload springs and lifters in back, extra large tires. It runs so I hope it will keep me going for a month before I need to do repairs. I now have a ride.
Mom had me get 30 bags of mulch (she was planning on having me get them the day of the accident so it is four months late). With the load on it, the truck "smiled" and was fun to drive.
I took Friday off to get tags and insurance. I went to the wrong place for the tag and walked farther than I had to day in one stretch, both ways. I did fairly well, though I was not happy about it. Few of my other stops for the day were of consequence.
SUNDAY
I was talking to a drummer. He gave me oak and Cherry boards. I decided to try to make a pair of drum sticks. I had made magic wands and people wondered if they were drumsticks. I made some hand measurements, placing it against my arm and hand and seeing the scale they would have to be.
I took the oak board since it was thicker, and cut it into square sticks longer than a drumstick was. I came up with three of them the right size and one a bit too narrow when I ripped the board pieces to width. That one will have to become involved in crochet.
I first rounded them, setting each to the side. When I was working the third one, it came loose from the tail stock and I stopped the lathe. The wood cracked on the end, so my first two were going to be my first drumsticks.
I then re-mounted them and got the basic drumstick shape. I need to do that a third time to fine-tune the shape and get it well sanded.
I did these in steps because I was not sure how long I could last on my feet. I did fairly well, sitting in front of a fan while preparing the next piece.
This was the first time I used the big lathe since the accident since it required standing, so I held off, avoiding it until I had a project that would not require long standing. I am not quite ready for really serious working, but can do light work like these drum sticks.
I hope to have half a dozen sets of sticks by the end of the year.
Since I am going with what feels right, I cannot plan ahead.
I will see what I do next week
A picture of me without the hat
A picture of the truck I got
Subscribe to:
Posts (Atom)